Xco One TitanEdge - 4090
Only one machine has reported its memory so far, so this answer rests on a single example. Check the label or open the panel before you buy.
Yes. 2 slots, up to 32 GB seen working.
It takes DDR5-4800 laptop-size sticks (SO-DIMM).
- Slots
- 2 SO-DIMM slots
- Type
- DDR5-4800 262-pin SO-DIMM
- Most seen working
- 32 GB in the one machine reported
- Firmware says
- 64 GB maximum (often wrong, so we show what machines run)
- How sure
- 1 of 1 report show this layout
Worked out from 1 hardware report of this laptop. Sources and method. Updated 10 Nov 2026.
Yes. It takes an NVMe M.2 SSD.
The slot runs at PCIe 4.0 x4, up to about 7.9 GB/s. M.2 drives come in 2230, 2242 and 2280 lengths (30, 42 and 80 mm). Check the length printed on your current drive before you order.
- Drive type
- NVMe (PCIe)
- Slot speed
- PCIe 4.0 x4, from 1 machine
- Length
- Check your current drive
- How sure
- NVMe drive in 1 of 1 machines
From 1 PCI device report. Sources and method. Updated 10 Nov 2026.
Illustration Match the label on your battery.
We don't have this model's battery capacity yet. The capacity (Wh) and the part number are printed on the battery itself. A replacement should match that part number.
- Capacity
- On the battery's label
How to read a battery label. Sources and method. Updated 10 Nov 2026.
Illustration Match the label on your charger.
We don't have this model's charger rating yet. The label on your charger shows it: the output line gives volts and amps, and volts times amps is the watts (19.5 V at 3.33 A is 65 W). Buy one with the same plug, the same voltage and at least as many watts.
- Rated output
- On your charger's label
How to read a charger label. Sources and method. Updated 10 Nov 2026.
Illustration Questions
Can I upgrade the RAM in the Xco One TitanEdge - 4090?
Yes. 2 slots, up to 32 GB seen working. It takes DDR5-4800 laptop-size sticks (SO-DIMM).
What type of RAM does the Xco One TitanEdge - 4090 use?
DDR5-4800 laptop-size sticks (SO-DIMM, 262-pin).
How much RAM can the Xco One TitanEdge - 4090 take?
Machines in the reports run up to 32 GB. The firmware reports a maximum of 64 GB, a figure that is often wrong.
What SSD does the Xco One TitanEdge - 4090 take?
Yes. It takes an NVMe M.2 SSD. The slot runs at PCIe 4.0 x4, up to about 7.9 GB/s. M.2 drives come in 2230, 2242 and 2280 lengths (30, 42 and 80 mm). Check the length printed on your current drive before you order.
Is this my laptop?
Check the model name on the label underneath. It should read TitanEdge - 4090.