HP Tablet 11-be0xxx
Only one machine has reported its memory so far, so this answer rests on a single example. Check the label or open the panel before you buy.
No. The memory is soldered to the board.
4 GB is built in and there is no slot to add more.
- Free slots
- None
- Type
- LPDDR4-2933
- Soldered
- 4 GB
- Firmware says
- 12 GB maximum (often wrong, so we show what machines run)
- How sure
- 1 of 1 report show this layout
Worked out from 1 hardware report of this tablet. Sources and method. Updated 10 Nov 2026.
Yes. It takes an NVMe M.2 SSD.
The slot runs at PCIe 3.0 x2, up to about 2 GB/s. A faster PCIe 4.0 drive works too, at that speed. M.2 drives come in 2230, 2242 and 2280 lengths (30, 42 and 80 mm). Check the length printed on your current drive before you order.
- Drive type
- NVMe (PCIe)
- Slot speed
- PCIe 3.0 x2, from 1 machine
- Length
- Check your current drive
- How sure
- NVMe drive in 1 of 1 machines
From 1 PCI device report. Sources and method. Updated 10 Nov 2026.
Illustration The battery in the one machine reported reports 32 Wh.
That is the design capacity the batteries themselves report, and the label can read 1 to 3 Wh higher. Other pack sizes may have shipped, so check the capacity printed on yours before you order.
- Capacity
- 32 Wh
- Pack code
- DM02032
From 1 battery reading. Sources and method. Updated 10 Nov 2026.
Illustration Match the label on your charger.
We don't have this model's charger rating yet. The label on your charger shows it: the output line gives volts and amps, and volts times amps is the watts (19.5 V at 3.33 A is 65 W). Buy one with the same plug, the same voltage and at least as many watts.
- Rated output
- On your charger's label
How to read a charger label. Sources and method. Updated 10 Nov 2026.
Illustration Questions
Can I upgrade the RAM in the HP Tablet 11-be0xxx?
No. The memory is soldered to the board. 4 GB is built in and there is no slot to add more.
What type of RAM does the HP Tablet 11-be0xxx use?
LPDDR4-2933 memory soldered to the board.
What SSD does the HP Tablet 11-be0xxx take?
Yes. It takes an NVMe M.2 SSD. The slot runs at PCIe 3.0 x2, up to about 2 GB/s. A faster PCIe 4.0 drive works too, at that speed. M.2 drives come in 2230, 2242 and 2280 lengths (30, 42 and 80 mm). Check the length printed on your current drive before you order.
What battery does the HP Tablet 11-be0xxx use?
The battery in the one machine reported reports 32 Wh. The pack code is DM02032. Check the capacity printed on yours before you order.
Is this my tablet?
Check the model name on the label underneath. It should read Tablet 11-be0xxx.