Shenzhen DOKE electronic MP80
Only one machine has reported its memory so far, so this answer rests on a single example. Check the label or open the panel before you buy.
Yes, you can add one stick. Up to 12 GB seen working.
12 GB is soldered to the board and 4 slots are free for a LPDDR5-6400 stick.
- Free slots
- 4 memory slots
- Type
- LPDDR5-6400
- Soldered
- 12 GB
- Most seen working
- 12 GB in the one machine reported
- Firmware says
- 44 GB maximum (often wrong, so we show what machines run)
- How sure
- 1 of 1 report show this layout
Worked out from 1 hardware report of this desktop. Sources and method. Updated 10 Nov 2026.
Check the drive you have.
The reports don't show this model's drive type yet. Look at the drive in it: a 2.5-inch box, about 7 by 10 cm, is SATA. A small stick is M.2, and its label says NVMe or SATA and its length (2230, 2242 or 2280).
- Drive type
- Check your current drive
How to tell a drive's type. Sources and method. Updated 10 Nov 2026.
Illustration Match the label on its power adapter.
We don't have this model's adapter rating. The watts, volts and plug size are printed on the adapter. A replacement needs the same voltage and plug and at least the same watts.
- Rating
- On the adapter's label
How to read an adapter label. Sources and method. Updated 10 Nov 2026.
Illustration Questions
Can I upgrade the RAM in the Shenzhen DOKE electronic MP80?
Yes, you can add one stick. Up to 12 GB seen working. 12 GB is soldered to the board and 4 slots are free for a LPDDR5-6400 stick.
What type of RAM does the Shenzhen DOKE electronic MP80 use?
LPDDR5-6400 memory soldered to the board.
How much RAM can the Shenzhen DOKE electronic MP80 take?
Machines in the reports run up to 12 GB. The firmware reports a maximum of 44 GB, a figure that is often wrong.
Is this my desktop?
Check the model name on the front or the label of the case. It should read MP80.