PLEXHD X79T rev. V1.0
Only one machine has reported its memory so far, so this answer rests on a single example. Check the label or open the panel before you buy.
Yes. 4 slots, up to 72 GB seen working.
It takes DDR3-1866 registered ECC full-size sticks (DIMM, RDIMM).
- Slots
- 4 DIMM slots
- Type
- DDR3-1866 240-pin DIMM registered ECC
- Most seen working
- 72 GB in the one machine reported
- Firmware says
- 96 GB maximum (often wrong, so we show what machines run)
- How sure
- 1 of 1 report show this layout
Worked out from 1 hardware report of this desktop. Sources and method. Updated 10 Nov 2026.
Yes. It takes an NVMe M.2 SSD.
M.2 drives come in 2230, 2242 and 2280 lengths (30, 42 and 80 mm). Check the length printed on your current drive before you order.
- Drive type
- NVMe (PCIe)
- Length
- Check your current drive
- How sure
- NVMe drive in 1 of 2 machines
From 2 PCI device reports. Sources and method. Updated 10 Nov 2026.
Illustration Check the label on the power supply.
We don't have this model's power supply rating. It is printed on the supply's sticker, inside the case next to its fan. Prebuilt desktops often use a supply shaped for their case, so match the shape and the plugs as well as the watts.
- Rating
- On the supply's label
How to read a power supply label. Sources and method. Updated 10 Nov 2026.
Illustration It takes processors for the LGA2011 socket.
Processors in the reports: Xeon E5-2670 v2 (1). Prebuilt desktops often only take processors from the generation they shipped with, so stay with the ones listed.
- Socket
- LGA2011
- Seen working
- Xeon E5-2670 v2
- How sure
- From 1 report
From the processor records in 1 hardware report. Sources and method. Updated 10 Nov 2026.
Illustration It has at least 2 full-length (x16) slots for a graphics card.
Cards in the reports: GeForce GTX 1060 5GB (1), Radeon HD 7850 / R7 265 / R9 270 1024SP (1).
- x16 slots
- At least 2, listed by the firmware
- Seen working
- GeForce GTX 1060 5GB, Radeon HD 7850 / R7 265 / R9 270 1024SP
From 2 PCI device reports and the firmware's slot table. Sources and method. Updated 10 Nov 2026.
Illustration Questions
Can I upgrade the RAM in the PLEXHD X79T rev. V1.0?
Yes. 4 slots, up to 72 GB seen working. It takes DDR3-1866 registered ECC full-size sticks (DIMM, RDIMM).
What type of RAM does the PLEXHD X79T rev. V1.0 use?
DDR3-1866 full-size sticks (DIMM, 240-pin).
How much RAM can the PLEXHD X79T rev. V1.0 take?
Machines in the reports run up to 72 GB. The firmware reports a maximum of 96 GB, a figure that is often wrong.
What SSD does the PLEXHD X79T rev. V1.0 take?
Yes. It takes an NVMe M.2 SSD. M.2 drives come in 2230, 2242 and 2280 lengths (30, 42 and 80 mm). Check the length printed on your current drive before you order.
What processor can I put in the PLEXHD X79T rev. V1.0?
It takes processors for the LGA2011 socket. Processors in the reports: Xeon E5-2670 v2 (1). Prebuilt desktops often only take processors from the generation they shipped with, so stay with the ones listed.
Can I add a graphics card to the PLEXHD X79T rev. V1.0?
It has at least 2 full-length (x16) slots for a graphics card. Cards in the reports: GeForce GTX 1060 5GB (1), Radeon HD 7850 / R7 265 / R9 270 1024SP (1).
Is this my desktop?
Check the model name on the front or the label of the case. It should read X79T rev. V1.0.