Nutanix NX-3050
Only one machine has reported its memory so far, so this answer rests on a single example. Check the label or open the panel before you buy.
Yes. 16 slots, up to 128 GB seen working.
It takes DDR3-1600 registered ECC full-size sticks (DIMM, RDIMM).
- Slots
- 16 DIMM slots
- Type
- DDR3-1600 240-pin DIMM registered ECC
- Most seen working
- 128 GB in the one machine reported
- Firmware says
- 128 GB maximum
- How sure
- 1 of 1 report show this layout
Worked out from 1 hardware report of this desktop. Sources and method. Updated 10 Nov 2026.
Check the drive you have.
The reports don't show this model's drive type yet. Look at the drive in it: a 2.5-inch box, about 7 by 10 cm, is SATA. A small stick is M.2, and its label says NVMe or SATA and its length (2230, 2242 or 2280).
- Drive type
- Check your current drive
How to tell a drive's type. Sources and method. Updated 10 Nov 2026.
Illustration Check the label on the power supply.
We don't have this model's power supply rating. It is printed on the supply's sticker, inside the case next to its fan. Prebuilt desktops often use a supply shaped for their case, so match the shape and the plugs as well as the watts.
- Rating
- On the supply's label
How to read a power supply label. Sources and method. Updated 10 Nov 2026.
Illustration It takes processors for the LGA2011 socket.
Processors in the reports: Xeon E5-2670 0 (1). Prebuilt desktops often only take processors from the generation they shipped with, so stay with the ones listed.
- Socket
- LGA2011
- Seen working
- Xeon E5-2670 0
- How sure
- From 1 report
From the processor records in 1 hardware report. Sources and method. Updated 10 Nov 2026.
Illustration Look for a full-length slot.
The reports don't list this model's slots. A graphics card needs a full-length (x16) slot, the longest one, and room in the case.
- x16 slots
- Not listed by the firmware
How to find a graphics card slot. Sources and method. Updated 10 Nov 2026.
Illustration Questions
Can I upgrade the RAM in the Nutanix NX-3050?
Yes. 16 slots, up to 128 GB seen working. It takes DDR3-1600 registered ECC full-size sticks (DIMM, RDIMM).
What type of RAM does the Nutanix NX-3050 use?
DDR3-1600 full-size sticks (DIMM, 240-pin).
How much RAM can the Nutanix NX-3050 take?
Machines in the reports run up to 128 GB. That matches the 128 GB maximum the firmware reports.
What processor can I put in the Nutanix NX-3050?
It takes processors for the LGA2011 socket. Processors in the reports: Xeon E5-2670 0 (1). Prebuilt desktops often only take processors from the generation they shipped with, so stay with the ones listed.
Is this my desktop?
Check the model name on the front or the label of the case. It should read NX-3050.