NCS-Tech MT-7280
Only one machine has reported its memory so far, so this answer rests on a single example. Check the label or open the panel before you buy.
Yes. 4 slots, up to 32 GB seen working.
It takes DDR3-1600 full-size sticks (DIMM).
- Slots
- 4 DIMM slots
- Type
- DDR3-1600 240-pin DIMM
- Most seen working
- 32 GB in the one machine reported
- Firmware says
- 32 GB maximum
- How sure
- 1 of 1 report show this layout
Worked out from 1 hardware report of this desktop. Sources and method. Updated 10 Nov 2026.
Check the drive you have.
The reports don't show this model's drive type yet. Look at the drive in it: a 2.5-inch box, about 7 by 10 cm, is SATA. A small stick is M.2, and its label says NVMe or SATA and its length (2230, 2242 or 2280).
- Drive type
- Check your current drive
How to tell a drive's type. Sources and method. Updated 10 Nov 2026.
Illustration Check the label on the power supply.
We don't have this model's power supply rating. It is printed on the supply's sticker, inside the case next to its fan. Prebuilt desktops often use a supply shaped for their case, so match the shape and the plugs as well as the watts.
- Rating
- On the supply's label
How to read a power supply label. Sources and method. Updated 10 Nov 2026.
Illustration Processors seen in these desktops.
Processors in the reports: Core i7-4790 (1). Prebuilt desktops often only take processors from the generation they shipped with, so stay with the ones listed.
- Seen working
- Core i7-4790
- How sure
- From 1 report
From the processor records in 1 hardware report. Sources and method. Updated 10 Nov 2026.
Illustration It has at least 2 full-length (x16) slots for a graphics card.
- x16 slots
- At least 2, listed by the firmware
From the firmware's slot table. Sources and method. Updated 10 Nov 2026.
Illustration Questions
Can I upgrade the RAM in the NCS-Tech MT-7280?
Yes. 4 slots, up to 32 GB seen working. It takes DDR3-1600 full-size sticks (DIMM).
What type of RAM does the NCS-Tech MT-7280 use?
DDR3-1600 full-size sticks (DIMM, 240-pin).
How much RAM can the NCS-Tech MT-7280 take?
Machines in the reports run up to 32 GB. That matches the 32 GB maximum the firmware reports.
What processor can I put in the NCS-Tech MT-7280?
Processors seen in these desktops. Processors in the reports: Core i7-4790 (1). Prebuilt desktops often only take processors from the generation they shipped with, so stay with the ones listed.
Can I add a graphics card to the NCS-Tech MT-7280?
It has at least 2 full-length (x16) slots for a graphics card.
Is this my desktop?
Check the model name on the front or the label of the case. It should read MT-7280.