MiTAC AIO M650
Only one machine has reported its memory so far, so this answer rests on a single example. Check the label or open the panel before you buy.
Yes. 4 slots, up to 4 GB seen working.
It takes DDR3-1333 laptop-size sticks (SO-DIMM).
- Slots
- 4 SO-DIMM slots
- Type
- DDR3-1333 204-pin SO-DIMM
- Most seen working
- 4 GB in the one machine reported
- Firmware says
- 32 GB maximum (often wrong, so we show what machines run)
- How sure
- 1 of 1 report show this layout
Worked out from 1 hardware report of this desktop. Sources and method. Updated 10 Nov 2026.
It takes a 2.5-inch SATA SSD.
The machines in the reports have a SATA controller. A 2.5-inch SATA SSD fits a 2.5-inch bay, or a 3.5-inch bay with an adapter bracket.
- Drive type
- SATA
From 3 PCI device reports. Sources and method. Updated 10 Nov 2026.
Illustration Check the label on the power supply.
We don't have this model's power supply rating. It is printed on the supply's sticker, inside the case next to its fan. Prebuilt desktops often use a supply shaped for their case, so match the shape and the plugs as well as the watts.
- Rating
- On the supply's label
How to read a power supply label. Sources and method. Updated 10 Nov 2026.
Illustration Processors seen in these desktops.
Processors in the reports: Pentium G860 (1). Prebuilt desktops often only take processors from the generation they shipped with, so stay with the ones listed.
- Seen working
- Pentium G860
- How sure
- From 1 report
From the processor records in 1 hardware report. Sources and method. Updated 10 Nov 2026.
Illustration It has a full-length (x16) slot for a graphics card.
- x16 slots
- At least 1, listed by the firmware
From the firmware's slot table. Sources and method. Updated 10 Nov 2026.
Illustration Questions
Can I upgrade the RAM in the MiTAC AIO M650?
Yes. 4 slots, up to 4 GB seen working. It takes DDR3-1333 laptop-size sticks (SO-DIMM).
What type of RAM does the MiTAC AIO M650 use?
DDR3-1333 laptop-size sticks (SO-DIMM, 204-pin).
How much RAM can the MiTAC AIO M650 take?
Machines in the reports run up to 4 GB. The firmware reports a maximum of 32 GB, a figure that is often wrong.
What SSD does the MiTAC AIO M650 take?
It takes a 2.5-inch SATA SSD. The machines in the reports have a SATA controller. A 2.5-inch SATA SSD fits a 2.5-inch bay, or a 3.5-inch bay with an adapter bracket.
What processor can I put in the MiTAC AIO M650?
Processors seen in these desktops. Processors in the reports: Pentium G860 (1). Prebuilt desktops often only take processors from the generation they shipped with, so stay with the ones listed.
Can I add a graphics card to the MiTAC AIO M650?
It has a full-length (x16) slot for a graphics card.