Endless EC-200
Only one machine has reported its memory so far, so this answer rests on a single example. Check the label or open the panel before you buy.
Yes. 2 slots, up to 2 GB seen working.
It takes DDR3-1333 full-size sticks (DIMM).
- Slots
- 2 DIMM slots
- Type
- DDR3-1333 240-pin DIMM
- Most seen working
- 2 GB in the one machine reported
- Firmware says
- 8 GB maximum (often wrong, so we show what machines run)
- How sure
- 1 of 1 report show this layout
Worked out from 1 hardware report of this desktop. Sources and method. Updated 10 Nov 2026.
It takes a 2.5-inch SATA SSD.
The machines in the reports have a SATA controller. A 2.5-inch SATA SSD fits a 2.5-inch bay, or a 3.5-inch bay with an adapter bracket.
- Drive type
- SATA
From 5 PCI device reports. Sources and method. Updated 10 Nov 2026.
Illustration Match the label on its power adapter.
We don't have this model's adapter rating. The watts, volts and plug size are printed on the adapter. A replacement needs the same voltage and plug and at least the same watts.
- Rating
- On the adapter's label
How to read an adapter label. Sources and method. Updated 10 Nov 2026.
Illustration Questions
Can I upgrade the RAM in the Endless EC-200?
Yes. 2 slots, up to 2 GB seen working. It takes DDR3-1333 full-size sticks (DIMM).
What type of RAM does the Endless EC-200 use?
DDR3-1333 full-size sticks (DIMM, 240-pin).
How much RAM can the Endless EC-200 take?
Machines in the reports run up to 2 GB. The firmware reports a maximum of 8 GB, a figure that is often wrong.
What SSD does the Endless EC-200 take?
It takes a 2.5-inch SATA SSD. The machines in the reports have a SATA controller. A 2.5-inch SATA SSD fits a 2.5-inch bay, or a 3.5-inch bay with an adapter bracket.
Is this my desktop?
Check the model name on the front or the label of the case. It should read EC-200.