ARBOR LYNC-712
Only one machine has reported its memory so far, so this answer rests on a single example. Check the label or open the panel before you buy.
Yes. 2 slots, up to 4 GB seen working.
It takes DDR3-1600 laptop-size sticks (SO-DIMM).
- Slots
- 2 SO-DIMM slots
- Type
- DDR3-1600 204-pin SO-DIMM
- Most seen working
- 4 GB in the one machine reported
- Firmware says
- 16 GB maximum (often wrong, so we show what machines run)
- How sure
- 1 of 1 report show this layout
Worked out from 1 hardware report of this desktop. Sources and method. Updated 10 Nov 2026.
Check the drive you have.
The reports don't show this model's drive type yet. Look at the drive in it: a 2.5-inch box, about 7 by 10 cm, is SATA. A small stick is M.2, and its label says NVMe or SATA and its length (2230, 2242 or 2280).
- Drive type
- Check your current drive
How to tell a drive's type. Sources and method. Updated 10 Nov 2026.
Illustration Match the label on its power adapter.
We don't have this model's adapter rating. The watts, volts and plug size are printed on the adapter. A replacement needs the same voltage and plug and at least the same watts.
- Rating
- On the adapter's label
How to read an adapter label. Sources and method. Updated 10 Nov 2026.
Illustration Questions
Can I upgrade the RAM in the ARBOR LYNC-712?
Yes. 2 slots, up to 4 GB seen working. It takes DDR3-1600 laptop-size sticks (SO-DIMM).
What type of RAM does the ARBOR LYNC-712 use?
DDR3-1600 laptop-size sticks (SO-DIMM, 204-pin).
How much RAM can the ARBOR LYNC-712 take?
Machines in the reports run up to 4 GB. The firmware reports a maximum of 16 GB, a figure that is often wrong.
Is this my desktop?
Check the model name on the front or the label of the case. It should read LYNC-712.